Swimming pools are fantastic for recreation as well as maintaining your and your family’s health. The plumbing of the pool must be installed, and a beautiful structure that is also safe must be built around the pool. Pool tile installations might cause you a few issues, both when building the pool and while you are using it. Pool tiles which is used in swimming pools, sauna and jacuzzi can crack or break for a variety of causes. It can be a result of the extreme cold, or the expansion and contraction of the pool tiles might cause cracks that could harm the joints and pool deck if you live somewhere where the temperature changes are more likely to happen. It might also happen if something hits the tiles directly. Let’s dive in to see how these factors that causes problems to your pool tiles.
1. TEMPERATURE VARIATIONS
Once installed, pool tiles do not remain in the same location exactly. The tiles can expand or compress in response to temperature variations. When all the tiles expand at once, pressure is applied to the entire structure even though this impact is essentially non-existent for individual tiles.
2. PRESSURE APPLICATION
The tiles inside a swimming pool would need to be able to withstand changes in water weight and pressure in addition to temperature fluctuations. The pool’s total weight would be evenly distributed throughout the submerged surface, but as more people used the pool, the pressure on the tiles would increase significantly.
3. POOL WATER CHEMISTRY AND CLEANING AGENTS
To keep the pool water hygienic for use, you would need to add chemicals like chlorine. Despite your best efforts to keep the pH level of the water stable, the chemicals you apply could react with the cement-based adhesive or fillers used to connect pool tiles. Even pool cleaning solutions might gradually degrade the surface. There are numerous solutions to avoid these issues, but they would need to be implemented during the building and installation of the pool’s equipment. After the pool shell is entirely ready and waterproof, the pool tiling procedure may start. The curing process may take seven to eight weeks, during which time you’d need to make sure the surface was dry and clean.
Prior to filling the pool, it is advisable to leave the cement-based fillers more than three weeks to cure after completing the gap filling. Additionally, any harm done to the pool tile needs to be repaired right once by an expert. Make sure you use a reputable company to fix your pool tiles because family members could be put in danger from cracked or broken tiles. And by saying that, if you are in the look for the best swimming pool contractors in Jeddah, then Kehlan Pools-Bridge Way KSA can be the right choice of experts.
PREVENTION OF POOL TILES FROM GETTING DAMAGED
Now, since you are familiar about the causes of pool tile damage, you should also know how to prevent them from getting damaged as well as someone said “Prevention is better than cure”. To help you with that, we the team of Kehlan pools- Bridge Way KSA is here with some suggestions. Scroll down and see for yourself.
1. POOL WATER CHEMISTRY AND CLEANING AGENTS
As mentioned earlier, swimming pool tiles are exposed to temperature variations and this can adversely affect the tiles, which causes damage. And, it’s not easy to change the pool tiles, as the temperature varies from day to day. So, the best option to consider is to choose the right tiles, which can withstand these changes to a great extent. Since you find many options out there, it’s hard to choose the right one. Well, Kehlan pools- Bridge Way KSA, being the best swimming pool specialists in Saudi Arabia, our exquisite collection of pool tiles can be the right choice for you.
2. CONSIDER THE EXPANSION JOINTS
Since the pool tiles are exposed to all sort of temperature changes, the chance for the expansion and contraction is most likely to happen. This can cause damage to your pool tiles and can pull down your pool’s beauty. So, make sure that all the joints are sealed properly, to ensure long life of your pool tiles.
3. LEVELED UNDERLAY
Make sure your underlay is level i.e., any lumps or dings in the concrete will give the tiles room to move and may cause them to break.
4. MAINTAIN PROPER WATER LEVEL
Once the tiles are in place on the pool’s bottom, keep them out of the sun and dryness, avoid leaving the pool empty for long stretches of time, and fill it up with water anytime you notice that there is a water level problem.
To get this all right, you need the help and guidance from the experts. Well, Kehlan pools-Bridge Way KSA is one of the best swimming pool experts in Jeddah, Saudi Arabia who can help you with all of them.